Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'RE: Few Added Hints' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
RE: Few Added Hints
Authored by: curtian4 on May 09, '02 06:10:47PM

hi all,

anyone trying to do this using windows xp? shahn's procedure was helpful, but my printer still doesn't seem to want to print. i have a lexmark z52 set up on the winxp pc and i'm using the "generic" print driver on the os x mac. if anyone can spot where i've gone wrong, i'd appreciate it. here's what i've done:

on the winxp pc: setup 2 printers. 1 is the lexmarkz52 using the normal lpt1 printer port, and shared as lexmarkz52. 2 is lpr-lexmarkz52 using the lpr port with my winxp pc's ip address (192.168.0.3) and "lexmarkz52" in the printer queue input, and it is shared as lpr-lexmarkz52.

on the os x mac: in print center, i've added lpr-lexmarkz52 as the lpr printer, the host as 192.168.0.3, "lpr-lexmarkz52" in the queue input, and had to use the generic 'driver' because lexmark z52 was not an option.

when i print a document on the mac, say a webpage, it spools thru print center, which sends it over to the pc. then on the pc with each of the printer queues open, i can see that the document goes first to the lpr-lexmarkz52 printer, and is instantly spooled over to the lexmarkz52 printer. when the document is in the lexmarkz52 window, it acts as if it's printing--the kb of the document increases as it would if a physical document were normally progressing out of the printer (though no document does). finally, the document is deleted out of the lexmarkz52 print queue window as if it was properly printed.

so, i know the i'm getting the mac printed document over to my pc printer queue, but it's not printing out.

any ideas anyone?

btw: in windows xp, i could not find any settings for binary vs. ascii. i'm not sure if this is a xp issue or just my individual lexmark print driver.

thanks,
curtian4



[ Reply to This | # ]
RE: Few Added Hints
Authored by: curtian4 on May 09, '02 06:24:27PM

I just did some more thorough reading and realized that i have to have a postscript printer (i've got an inkjet).

i'll try the ghostwriter solution.

thanks anyways,
curtian4



[ Reply to This | # ]