Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'Fixed by paritioning iPod hard drive!' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Fixed by paritioning iPod hard drive!
Authored by: bryanus on Jun 18, '06 12:25:44PM
As a follow up, I gave up on trying to use this method and found a couple links online regarding formatting the iPod into multiple partitions:

http://www.macgeekery.com/node/6
http://www.bsodmike.com/?page_id=13

Using a combination of info from both of these, I was able to render the first 6GBs of my 20GB iPod as allocated for the firmware, and the remaining for music. Took me about 3 hours to figure out how to do this, but once I got the hang of it, it was fairly straightforward and i was able to repeat the procedure several times. At first i used a 4 GB partition for the firmware, but hit some more bad blocks around 5 GBs, so moving it to 6 seems to have solved the trick. I now have a perfectly usable 12+GB ipod and so far have filled it to only 200MBs remaining and no copying/hanging problems. Thanks and Good luck!

[ Reply to This | # ]