Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'recover more blocks using 'raw' devices' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
recover more blocks using 'raw' devices
Authored by: krishna on Jan 08, '06 10:45:07PM

I just finished recovering (under a linux box I set up to be dedicated for the recovery operation) a fat32 partition that was giving me errors on what appeared to be multiple blocks. Then I followed 'info ddrescue' 's information on setting up a raw device and retrying the recovery, it came down to a single 512-byte sector (!) that was bad and producing multiple block errors.

So if I can find which file that block belongs to, I have my whole partition back. While ddrescue's not a linux-specific tool, that valuable 'raw' information in the documentation is definitely linux-specific; so I wouldn't say I wouldn't say ddrescue has *nothing* to do with Linux, since it definitely seems to be the chosen platform for testing. Of course, information on raw devices under macosx would be awesome to have.



[ Reply to This | # ]
recover more blocks using 'raw' devices
Authored by: Detrius on Jun 30, '10 10:03:48AM

On OS X, raw disks are:

/dev/rdisk*

Block devices are:

/dev/disk*

If you use rdisk, ddrescue will pull the data MUCH more quickly--of course, depending on the state of the drive.



[ Reply to This | # ]