Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!

Click here to return to the 'Use a D-Link DWL-G122 USB WiFi Dongle' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Use a D-Link DWL-G122 USB WiFi Dongle
Authored by: Macmiester on Nov 30, '05 09:02:11AM

Not sure if you figured this out or not, but I was running into the same problem with a bondi rev A iMac running 10.3. I later discovered there are 2 installers I needed to run from Ralintech to get things working. I'm using version 1.09 and it works great (even after sleep).

1.) Download and unzip version 1.09
2) Install the USB driver package first (STA_2500USB)
3) Restart and wait... (for some reason, it takes a good 20 minutes for the resart to complete...)
4) Install the _MACOSX package.
5) Restart and wait again...
6) Attach the DWL-G122 dongle and the wireless utility will open.
7) Open the network preferences and you'll get a pop up telling you about the new network connection. From that point just follow the instructions from D-Link (BTW, I couldn't get their driver to work..)


[ Reply to This | # ]