Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'A possible fix for a highly unstable G3 or G4 Tower' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
A possible fix for a highly unstable G3 or G4 Tower
Authored by: Big Red on Sep 08, '05 10:42:37AM

Well, I was convinced for 4 months that my Smurf was toast. I could boot up from CD, but could not boot up on a drive attached to the primary IDE bus or a drive connected to an IDE66 PCI card, despite what felt like a dozen reinstalls. I thought it was the PCI card, memory, tried to pull everything. I finally detatched everything from the primary bus and booted with the only hard drives connected to the PCI card. It's been working like a dream ever since.

It was a nice excuse to buy a new machine, and now my girlfriend has a nice functional G3 tower for simple computing tasks.



[ Reply to This | # ]
A possible fix for a highly unstable G3 or G4 Tower
Authored by: RoyalJimP on Sep 08, '05 04:11:52PM

I bought (on ebay) a sawtooth logic board to put in my Smurf.
I also found the only way to get stable operation was to put the IDE hard drives on the secondary slower optical bus. It would not boot for 9.2 to osX on the primary bus. And did silly things. Since switching busses it is very stable, no problems two years now. I've considered a PCI ATA 100/133 card just for the faster transfer speeds, but just haven't sprung yet cause it's been adequat for the use it's getting



[ Reply to This | # ]