Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the '10.4: A workaround to use the Xerox Phaser 6100/n' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
10.4: A workaround to use the Xerox Phaser 6100/n
Authored by: Mars_Artis on Jul 13, '05 06:08:27AM

Ok mate I recently updated to 10.4.2
Since i was unable to find the updater marty was speaking about I google around and i found good tips from macintouch http://www.macintouch.com/tiger05.html
follow these 10 simple steps:

1. In Print Center's Printer List, click the 'Add' button, to add a new printer
2. In the Printer Browser window that pops up, click the 'IP Printer' tab at the top of the window - this will allow you to connect to your printer using a TCP/IP- based protocol
3. In the 'Protocol' menu, select "Line Printer Daemon - LPD"
4. In the 'Address' field, enter the IP address of your Samsung printer - you can check your printer's IP address by printing its 'Configuration Page'.
5. Leave the "Queue" field blank
6. In the "Name" field, enter any name you'd like to use for your printer (Ex: "Samsung CLP-500")
7. Leave "Location" blank
8. In the "Print Using" menu, select "Samsung"
9. The window extends, and your printer model should appear inside a selectable list. Select it.
10. Click the 'Add' button, to add the printer to your Printer List! Done! Works like a charm, and your computer should be able to print to it again

anyway I have to add that using the Xerox driver on 10.4 to 10.4.1 worked for me.
For 10.4.2 I had to use the Samsung CLP-510n driver



[ Reply to This | # ]