Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!

Click here to return to the 'Possibly mount unmountable disks across a network' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Possibly mount unmountable disks across a network
Authored by: Kiwibloke on Jun 15, '05 10:58:31PM

How it was done.
I used disk utility to show the unmounted disk in its window, highlighted the disk I wanted and pressed the info button. This gave me the disk identifier number that I need for later on.
My disk was not mounted, visible in disk utility but greyed out. The info pane in disk utility had nothing for the mount point so I had to make one.
In terminal
User:~ User$ mkdir /Volumes/newname
where newname is the mount point you need to make, I found it had to be the same name as the dead disk then I did
User:~ User $ mount -t hfs -r /dev/diskXXX /Volumes/newname
where XXX is the disk identifier above and newname is the mount point name above.
Then to get it to mount in the finder I did
User:~ User $ disktool -r
to refresh for applications so they could see it and yay there it was. originally I had not refreshed the disk arbitration, but was able to see it on my wifes Emac as I assume it logged on as a new app and saw the disk.
Now I dont need the network to do it.
If it doesnt work try recreating the mount point
User:~ User$ mkdir /Volumes/newname
and if it says directory exists then do all the other steps again.
The only problem is the disk mounts read only and all files copied off it need the permissions set to read and write to use them porperly.
Pulled together from bits on the web, I know just about nix 'nix but for me it worked, simple mounting seems to fail as the finder tries to talk to the disk before mounting, the long terminal command mounts the disk read only (apparently) and prevents the mounting failure.

Good luck, great site

[ Reply to This | # ]