Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'Create HFS+ and FAT32 partitions on one external drive.' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Create HFS+ and FAT32 partitions on one external drive.
Authored by: dstrelau on Jun 14, '05 06:24:58PM

I don't have a Wintel machine to test it on at the moment, but I think I got this working. The partition table shows up in both pdisk and fdisk and both partitions (I created an HFS+ and a FAT32) show up on my Mac.

I'm guessing that diskutil with MBRFormat should be okay, but I did use fdisk. It's pretty easy if you just use the 'help' and '?' commands.

My disk gave the same 'Invalid Argument' complaint. I found that after fdisking, it had changed from /dev/rdisk1 to /dev/rdisk2 -- strange. Also, even when I put in the correct disk number, I still got 'Invalid Argument,' except this time, the drives remounted and the write light on the drive flashed.



[ Reply to This | # ]