Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'Format a NTFS hard drive in 10.3 - NOT' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Format a NTFS hard drive in 10.3 - NOT
Authored by: renderhead on Apr 21, '05 01:19:19PM
Maybe you should read a hint twice before you decide to comment on it.

1.) He never said that he formatted it as NTFS. He said that it was already NTFS, and he wanted to format it. Disk Utility won't let you format a volume that's already NTFS. It will, however, let you format the disk using the method he described.

2.) He didn't boot up from an install disk. He was about to, but he tried this solution first.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: macslut on Apr 21, '05 04:43:08PM

Sorry, I thought we were speaking *English* here. "Format a NTFS hard drive" means that you're going to end up with a NTFS hard drive. "Reformat a NTFS hard drive" means the format will be whatever you are capable of choosing.

This isn't a nitpick, this is about searching this site or the web in general for information on how to format a drive as NTFS in OS X, and finding this hint headline and having to read through to get an ambiguous explanation of what he was trying to achieve.

The whole post is even more ambiguous when you read that he apparently put the drive back in the PC before donating it.

The *hint* here should've been about the difference between re/formating a drive and a volume.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: madamimadam on Apr 21, '05 05:06:06PM

You are an idiot; it is quite obvious what they are saying

An adjective before a noun describes the noun in present tense.

If I said "please get me the NTFS hard drive", one would get me a hard drive formatted in NTFS, so why then would "format a NTFS hard drive" mean "get a drive and format it to the NTFS standard"?

To describe future tense one would place the adjective after the noun like in the above sentance or in "format a hard drive to NTFS".


Thanks for the tip, I'll need it in the next few days



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: kalisphoenix on Apr 21, '05 09:06:42PM

"Create a new file."

If adjectives always referred to nouns as they currently exist, then you'd be told to "create a nonexistent file." I think this is relevant given the fact that a drive can be unformatted, and the act of formatting would create an NTFS-formatted hard drive.

I understand that this might be getting a little intellectual here, but there's no reason to assault anyone.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: atter_cob on Apr 22, '05 02:56:36AM

"Create a new file" -- Create a ( new file ) -- Create a file which has the quality of being new.

"Format an NTFS disk" -- Format an ( NTFS Disk ) -- Format a disk which has the quality of being NTFS.

To make this even more clear, consider:

"Smash an NTFS disk".

The author of the original post knows English well enough to write a simple sentance. "Macslut" is both rude and ignorant.

It would be interesting to know how to "NTFS format a drive" or "format a drive with NTFS" using a mac.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: macslut on Apr 22, '05 09:41:34PM

"Macslut is both rude and ignorant."

Great, at least 3 people have posted here that they were confused about what the title meant. I'm the first to point it out, get called idiotic, and now called ignorant by you, and somehow I'm the rude one.

"It would be interesting to know how to "NTFS format a drive" or "format a drive with NTFS" using a mac."

I totally agree, which is why I clicked on the article's title in the first place (thinking it could not be done). Apparently, I'm not alone as others see the confusion as well. By the rules of our English language, it is an ambiguously written title. Disagree and call me every 4 letter word in the book, but it doesn't change the *fact* that as demonstrated, the article's title confuses people.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: meh on Apr 23, '05 03:24:44PM

I am the original poster of this hint. I see now how the title could have been confusing or misleading. Perhaps I should have called it "DE-format an NTSF hard drive in 10.3.
It was my first post on this site, and I apologize for any confusion.
That said, I do have to comment on one thing. Macslut, I can understand why you may have been confused by the title of the hint, but based on your first comment in this thread, it seems you didn't understand the hint itself either.
I guess the lesson to learn from this is to take a moment to think and proofread before clicking the SUBMIT COMMENT button.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: calroth on Apr 24, '05 09:28:41PM

"Great, at least 3 people have posted here that they were confused about what the title meant. I'm the first to point it out, get called idiotic, and now called ignorant by you, and somehow I'm the rude one."

If 3 people here think that the title is something other than what it was, then there are two non-mutually exclusive possibilities: a) The title is misleading, or b) The 3 people are ignorant.

We have established that a) is not the case, which implies that b) is the case. Please move on.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: madamimadam on Apr 22, '05 03:21:10AM

---"Create a new file."
If adjectives always referred to nouns as they currently exist, then you'd be told to "create a nonexistent file.---

The word "new" in that example is completely unnecessary. You wouldn't tell someone to create an old file or create a current file. Strictly speaking, the sentance fragment should read "create a file".

---I think this is relevant given the fact that a drive can be unformatted, and the act of formatting would create an NTFS-formatted hard drive.---

A drive could be unformatted and a drive could be formatted as NTFS but this is not relivant to the sentance in question.

---If you think it was so obvious as to what the hint said that the drive was ultimately formated as, then please tell us what the format of the drive became after the hint was applied.---

Arbitrary; the hint is completely unrelated to which format the poster needed the drive in, all the matters is that the format itself was unavailable.

---Meanwhile, this page will live in search indexes as "10.3" "format" "NTFS" "hard drive". While those of us know that you can't currently format a NTFS drive with the current version of Disk Utility, I bet many who would search and find this would be confused.---

But if I wanted to find out how to format an NTFS drive into, as an example, unpartitioned space, wouldn't I still search for "10.3", "format" and "NTFS"?

---The fact that it was originally NTFS really had nothing to do with the hint. The author was confused about the differences between formating a volume versus formating a drive. Had the drive been formated in other ways to begin with, the same problem could've occurred and the same solution could be possible.---

That is a rediculous comment, have you actually tried out what you say? If you go to Disk Utility it will show the erase option as being available in most situations whether you choose the disk or the partition unless the drive is the currently active boot drive. What the author says is that a mounted NTFS drive can not be erased until it is unmounted but non-boot HFS/+ drives certainly can be.

---Ah, but the author said the equivalent to "please get me *a* NTFS hard drive" which unlike your example, implies that *any* hard drive could be obtained and made NTFS to satisfy the request.---

The only problem with that statement is that the author didn't say "please get me a" and the sentance "format a NTFS..." is completely different.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: macslut on Apr 22, '05 10:15:03PM

-- Arbitrary; the hint is completely unrelated to which format the poster needed the drive in, all the matters is that the format itself was unavailable.

You mean that "the ability to format" was unavailable, yes? The author never discusses if the NTFS format is available or not as an option. Apparently the author either didn't know or care what the drive was formatted as when he put it back in the PC. You and I both know that the format NTFS was not available as an option, but someone coming to this hint with know prior knowledge of this, and seeing that he ended up putting the drive back in the PC, has no way of knowing that the ability to format as NTFS is not an option.

-- But if I wanted to find out how to format an NTFS drive into, as an example, unpartitioned space, wouldn't I still search for "10.3", "format" and "NTFS"?

Sure, and ideally see an article with the title "How to reformat an NTFS hard drive" or some of the other examples others have posted.

-- That is a rediculous comment, have you actually tried out what you say? If you go to Disk Utility it will show the erase option as being available in most situations whether you choose the disk or the partition unless the drive is the currently active boot drive. What the author says is that a mounted NTFS drive can not be erased until it is unmounted but non-boot HFS/+ drives certainly can be.

There are far more formats than NTFS/HFS/HFS Extended, and all kinds of partition combinations. The issue is the inability to erase a volume using Disk Utility that is in a format that Disk Utility itself can not create, unless you reformat the drive. It is at this point that you are limited to what Disk Utility can format a drive as (namely HFS, HFS Extended, FAT32 and UNIX).

-- The only problem with that statement is that the author didn't say "please get me a" and the sentance "format a NTFS..." is completely different.

You're quoting me out of context. The sentence "Format a NTFS..." is much closer to "Please get me a..." than it is to "Please get me the..." which is the point I was making as a response to the post where "Please get me the..." was used as an example.

I'm not *trying* to be pedantic here (honest, I'm not), I'm just pointing out what others have since reiterated, and that is the title of this hint is misleading.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: macslut on Apr 21, '05 09:25:43PM

I'll try this again...

If you think it was so obvious as to what the hint said that the drive was ultimately formated as, then please tell us what the format of the drive became after the hint was applied.

Meanwhile, this page will live in search indexes as "10.3" "format" "NTFS" "hard drive". While those of us know that you can't currently format a NTFS drive with the current version of Disk Utility, I bet many who would search and find this would be confused.

The fact that it was originally NTFS really had nothing to do with the hint. The author was confused about the differences between formating a volume versus formating a drive. Had the drive been formated in other ways to begin with, the same problem could've occurred and the same solution could be possible.

Now on to English 101...

'If I said "please get me the NTFS hard drive"...'

Ah, but the author said the equivalent to "please get me *a* NTFS hard drive" which unlike your example, implies that *any* hard drive could be obtained and made NTFS to satisfy the request.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: atter_cob on Apr 22, '05 02:58:59AM

> Now to English 101

Yes, you do need to go to English 101. The hint does just what the author said it does.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: pantera on Apr 22, '05 08:23:59AM

Ok, I would let this slide if, in addition to being an idiot, you didn't behave like an asshole.

Your claim that relative position of adjective vs. noun has any relation to tense is absolutely unfounded. In other words: this is complete and utter bullshit!

For those who want an argument beyond insults, I would just suggest to consider the phrase "create a NTFS hard drive".

As to the ambiguity of the title, I might add that "format" in standard nomenclature is synonymous with "create a file system". The usual interpretation of "format a NTFS hard drive" would therefore be "create a filesystem of the type NTFS" (within a partion on a hard drive). The result would be a "NTFS volume" using Macintosh terms.

From the hint it is not even clear if the poster actually "formatted the drive", whether what he did affected the partition table (which is quite different between Mac and other systems), created a new file system, etc. It is therefore not clear if the resulting disk is even usable on a PC.

I'm not saying the hint is useless. Deleting data from a disk formatted with a file system not well supported by Mac OS X can certainly be necessary in some cases. It's just not what one would expect under the title "format a NTFS drive".



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: Bruce Miller on Apr 21, '05 05:53:14PM

I was confused by the hint's intent also. Was the drive finally to go back inside Windows box or for Mac?

Additionally, I had nothing but trouble trying to install a Windows OS on any disk formatted by a Mac as FAT32.

Windows could mount as external drive, but required reformatting with Partition Magic to actually install an OS. It reported as corrupted MFT in PM otherwise. All drives for Windows use get formatted using only Windows since for me.

Hopefully, that donation receipient doesn't go through what I did if that drive was meant to be put back inside the Windows tower.



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: meh on Apr 23, '05 03:55:59PM

Just one more comment here to clarify.
I was given a PC with XP on it and I knew of a group that would benefit from having the machine. I didn't want to just give the computer to them, because the hard drive still had all the data on it from the original donor.
Being lazy and a Mac snob, I didn't want to have to plug in everything to the PC only to boot if off a floppy and then format the hard drive, so I took the hard drive out of the PC and put it in an external enclosure, with plans on wiping the drive in OS X.
I wasn't able to do so, since NTFS drives are read only when mounted in OS X. I looked around on the web for solutions, and the only one I had found was to boot up off of a Mac OS install CD and then wipe the drive from there (which, in hindsite, is probably just doing the same thing that I described in the hint - formatting an unmounted drive).
That seemed to be too much work for me, so I experimented a bit and discovered the solution I posted about.
Now that the drive is wiped clean, I can give it (and the rest of the computer) to the youth group. I'll let them know that the drive needs to be formatted and that Windows needs to be installed.
My concern was in securing the donor's data (by destroying this copy of it), and in not having to do much. I accomplished both goals.
To remove the hard drive from the PC, I had to undo 6 screws in total, and 2 cables (power and IDE). To use my external USB2 enclosure, I just popped the lid off and plugged the drive in to power and IDE (didn't bother closing the enclosure). Now that the drive is wiped, I put it back into the PC (4 mounting screws, power and IDE cables, 2 screws to hold the case panel in place) and all is well.
Now back to being lazy...



[ Reply to This | # ]
Format a NTFS hard drive in 10.3 - NOT
Authored by: jeremyp on Apr 22, '05 04:52:25AM

The point is that the title leads one to expect an article about how to put an NTFS file system on a disk using Mac OS X. You can argue as much as you like that technically that is not what the title says, but the fact is that I and probably lots of other people clicked on the link expecting to be shown how to create an NTFS file system on Mac OS X.



[ Reply to This | # ]