|
|
A possible fix for a Mac that won't power up
It's a good idea to always check the voltage on the battery because of the discharge curve on Lithium ion batteries. The drop off is rather steep as compared to a alkaline type which drops off gradually. Since the motherboard doesn't draw that much power, simply warming it up will often do the trick (ie. like your remote control for the TV).
A possible fix for a Mac that won't power up
I hope you don't mean warming up the battery. You don't want to warm up a lithium ion battery. Just google what could happen if you do that.
A possible fix for a Mac that won't power up
Actually, you want to measure the battery's voltage and its current--lithium batteries (at least the 3.6 volt, 1/2 AA batteries used to power Mac clock/RAM chips) will maintain their rated voltage even after they've practically drained away, but their current level will tell the true story; they won't measure substantially less than their rated voltage until some time after they're no longer useful. What's happened is the battery's chemicals have changed state, to the point where the battery is basically a big resistor and so they can't deliver enough current, though the voltage deceptively still looks OK. Unfortunately, many cheap digital meters don't have a current measuring scale. |
SearchFrom our Sponsor...Latest Mountain Lion HintsWhat's New:HintsNo new hintsComments last 2 daysLinks last 2 weeksNo recent new linksWhat's New in the Forums?
Hints by TopicNews from Macworld
From Our Sponsors |
|
Copyright © 2014 IDG Consumer & SMB (Privacy Policy) Contact Us All trademarks and copyrights on this page are owned by their respective owners. |
Visit other IDG sites: |
|
|
|
Created this page in 0.28 seconds |
|