Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'Not working with 10.3.4 and HP Deskject 882C' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Not working with 10.3.4 and HP Deskject 882C
Authored by: millsap9 on Aug 04, '04 12:28:59PM

Thanks to everybody who's posted hints on here to get me going! I had to do a slight variation mixing a few of them to get my XP laptop printing via Airport Express (G4 and Powerbook were both printing fine already).

-connect all the cables to airport express and turn it on, verify that all computers can access it - i.e. they should all have internet connectivity at this point
-open printers and faxes in XP Start menu
-click add printer
-select "local printer attached to this computer" and deselect "automatically detect..."
-click create a new port, choose standard TCP/IP
-enter 10.0.1.1 for printer name/IP address
(yes, to this point the instructions were exactly the same as the airport express doco)
-select Custom instead of standard device type
-select Raw LPR to port 9100
-select next, choose your appropriate printer when prompted (and name it), select finish

Sort of a combo of some of the other responses on this thread that finally worked for me. Good luck!



[ Reply to This | # ]
Not working with 10.3.4 and HP Deskject 882C
Authored by: querying on Jul 19, '05 08:36:18PM

Just to make sure, you're using LPR, right? If so, what are you using as your queue name?



[ Reply to This | # ]