Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!

Click here to return to the '10.3: Check network speed to resolve connection issues' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
10.3: Check network speed to resolve connection issues
Authored by: ALLUPNU on Jul 10, '04 04:41:31AM

This is a valid hint, at work we have a Cisco based network (ATM) and it doesnt like the AUTO/AUTO (speed/duplex) setting. You need to know your port speed and make sure the NIC settings match otherwise you will have many transmit and receive errors. If the port is set to auto auto then it is anybodys guess as to what the two NIC's will negotiate. I suggest unless the network port, switch, router or hub is hard coded to a specific speed and duplex, leave the default setting unchanged. If the LAN/WAN side is hard coded set the Mac's NIC to match that setting.


[ Reply to This | # ]