Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'Use UDP protocol, forwarding port 9' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Use UDP protocol, forwarding port 9
Authored by: the_doug on Nov 12, '03 04:04:47PM

After updating the firmware on my Linksys router, the port forwarding page now lets me select "Protocol UDP".

I had success forwarding port 9 to the IP address of the machine I wanted to wake and setting UDP to on (and clicking the "enable" check box). Then, using Wake550 with the WAN's IP address and my target machine's ethernet address from Network System Prefs, I was able to wake it remotely through the router.



[ Reply to This | # ]