Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'Asus 7100 Pro SE MX 400 GF2' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Asus 7100 Pro SE MX 400 GF2
Authored by: bingster on Jan 10, '03 11:49:06AM

hi guys

i REALLY ho u can help me out here cuz i have some probs i dont understand:

Out of the box it "worked" (Massive flickering with wide green strips) on OS 9.2 and OSX 10.2 so I think that the only thing that I had to do, was to upgrade the Rom form 1028f (the card's factory Rom, from System Profiler) to 1045 on OS9. But that doesn't work at all, nothing happens. The card is in my AGP slot as the only card in the machine! The monitor doesn't "blink" under the flashing process and after restart the card Rom is still 1028f. How do I exact make the Rom flash on 9 and witch Rom and Flasher should I use?

I have also tried to flash the card on my PC, according to Charlie Hayes on cybercoment.com, but that didn't help me a lot! The Rom on the card is still 1028f. I even tried to flash back, it witch the original PC Rom/BIOS from Asus after a complete deleting of the Rom, and then back to the Mac one, I tried with – nVidia 1027f / 1055 / 1075twin and I found a Rom named AsusV7100(MAC).ROM and V7100Pro/pure.ROM But still nothing happens, the card Rom is still 1028f. I have also tried with different flashers, with and without the –m option. What flasher and Rom will work with the card?

My Mac spec:
One partition with OSX 10.2 and one with OS 9.2.1
G4 400 MHz AGP-Graphics (x1) x2
512 MB Ram - 3 PCI (33 MHz) and AGP slots - 10/100/ Ethernet

can u help plz.
t in advance

Michael



[ Reply to This | # ]