Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'SMC Barricade Part Number 750.5435' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
SMC Barricade Part Number 750.5435
Authored by: rakozy on Oct 05, '02 06:58:09AM

Note that if you have rev 1.41.004 of the Barricade firmware, you must set the queue name to "LPT1", not "lp". If you try to set the queue to "lp", print jobs are stopped midway through the print process.

The firmware rev 1.93s1 appears to be for another version of the router (part number 750.5312) only.

Following the advice posted on this site, I was able to get my Mac running 10.2 to print to my HP DeskJet 970xi using the Gimp-Print 4.2.2 drivers.



[ Reply to This | # ]
SMC Barricade Part Number 750.5435
Authored by: kevin11 on Jan 17, '03 02:21:07AM

YES! this was the tip I needed! thank you!!!



[ Reply to This | # ]
LPT1 was the trick!
Authored by: alajuela on Jan 25, '03 06:18:00PM

I replaced my failed 7008BR with a 7004ABR, and it is running firmware 1.42.003. The trick with this unit is also to use the Win-oriented terminology LPT1. And I think that much of this is now documented on the SMC site.



[ Reply to This | # ]
SMC Barricade Part Number 750.5435
Authored by: jasonheyd on Sep 21, '03 11:12:27AM

FYI, LPT1 is case-sensitive .. lpt1 will work, while LPT1 will not.



[ Reply to This | # ]
SMC Barricade Part Number 750.5435
Authored by: John Strung on Nov 23, '03 11:01:37AM

I am not having much luck with this. I followed the instructions found here using both lp and lpt1 as the print cue and using the "Epson Stylus Color, CUPS+GIMP-Print v.4.25" driver. When I try to print, I get a message, showing "Printing 0,28%" etc., up to 100%, followed by "Connecting to 192.168.1.1 on port 631" followed by "network host 192.168.1.1 is busy". (192.168.1.1 is the IP address I use for the SMC 7004AWBR router to which the Epson 740 is attached by a parallel printer cable)

I am using a 7004AWBR, Firmware 142.005, and OS X Panther.

Any suggestions?



[ Reply to This | # ]
SMC Barricade Part Number 750.5435
Authored by: Kutter on Nov 23, '03 01:50:13PM

I was able to print via an SMC router/print server under Jaguar. When I upgraded to Panther, this feature broke.

I bought a new SMC router last week, the SMC2804WBRP-G, which is a wireless G router with built-in USB print server. The manual it comes with is terrible.

For printing on the Mac, the manual says this:

"Macintosh OS supports Plug-n-Play installation of the printer server servicice."

That's all the manual says. I am not sure what they mean by Plug-n-Play since the printer plugs into the back of the router. I tried to configure the print server like I did with my old router but I get the 192.168.2.1 is busy message.

I have not got the print server working on a Windows XP machine either.

I'll probably have to call SMC Tech support about this one...

L8R.



[ Reply to This | # ]
SMC Barricade Part Number 750.5435
Authored by: John Strung on Dec 23, '03 11:16:50PM

PROBLEM SOLVED! The problem turned out to be a Panther bug. The Fix is posted here: http://www.allosx.com/1067395661/index_html



[ Reply to This | # ]