Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'auto selected full-duplex' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
auto selected full-duplex
Authored by: kd_121 on Oct 03, '02 04:10:44PM

Hi,
I thought I would check mine, and it comes up:

media: autoselect (100baseTX <full-duplex>) status: active

I have not changed anything and I havn't tried to test or verify, but network works fast both ways for the most part. If it is auto sellecting full-duplex do you think it's working then? Or is there something flawed?

Thanks,
chris



[ Reply to This | # ]
auto selected full-duplex
Authored by: Eakster on Dec 21, '02 11:56:58PM
Yeah mine says that too. I have a G4 dual 450.

[Eaksters-Computer:~] eakster%ifconfig
lo0: flags=8049 mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010 mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863 mtu 1500
inet6 fe80::230:65ff:fea6:f9a0%en0 prefixlen 64 scopeid 0x4
inet 192.168.123.162 netmask 0xffffff00 broadcast 192.168.123.255
ether 00:30:65:a6:f9:a0
media: autoselect (100baseTX ) status: active
supported media: none autoselect 10baseT/UTP 10baseT/UTP 10baseT/UTP 10baseT/UTP 100baseTX 100baseTX 100baseTX 100baseTX 1000baseTX 1000baseTX 1000baseTX 1000baseTX

[ Reply to This | # ]
auto selected full-duplex
Authored by: Eakster on Dec 22, '02 12:04:48AM

Sorry the HTML took out the <full-duplex> of my last post
Here is my terminal text capture in plain text format :)

[Eaksters-Computer:~] eakster% ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::230:65ff:fea6:f9a0%en0 prefixlen 64 scopeid 0x4
inet 192.168.123.162 netmask 0xffffff00 broadcast 192.168.123.255
ether 00:30:65:a6:f9:a0
media: autoselect (100baseTX <full-duplex>) status: active
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 1000baseTX <full-duplex,flow-control,hw-loopback>



[ Reply to This | # ]