Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!


Click here to return to the 'Set up the Minolta 2300DL printer on OS X' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
Set up the Minolta 2300DL printer on OS X
Authored by: triker dave on Nov 09, '09 05:02:21AM

Another update:
Those instructions will work with Leopard, however I have recently installed Snow Leopard (OSX 10.6) and I have found it slightly different to set up now.
In Snow Leopard to connect to 2300DL through Ethernet:
1. Download and install the Minolta 2430DL drivers (Yes, 2430DL).
2. Go into Print and Fax - click on the + to add printer
3. Select Konica Minolta magicolor 2300DL - Bonjour
4. Set the location as the IP address that is assigned to your 2300DL (eg. 192.168.1.248)
5. Print using - select printer software - select the Konica Minolta 2430DL from the drop down list - click ADD
6. Select any installable options you have fitted to the printer - Click Continue
7. You are now done. Print a test page.

Hope this clears things up for Snow Leopard users.

---
I have some Mac G4 Graphite spares - visit www.davestanford.co.uk/hardware.html



[ Reply to This | # ]
Set up the Minolta 2300DL printer on OS X
Authored by: osxPete on Apr 10, '10 08:28:50AM

Another way to get this Minolta QMS 2300DL working on OS X 10.6.3

from http://www.openprinting.org/printer/Minolta/Minolta-magicolor_2300_DL you'll find detailed instructions
http://foo2zjs.rkkda.com/

note: you do need to compile it, but it worked perfectly. (use curl instead of wget or browser to download .tar.gz file)



[ Reply to This | # ]