Submit Hint Search The Forums LinksStatsPollsHeadlinesRSS
14,000 hints and counting!

Set up an HP 2500CM inkjet printer with OS X 10.2 System
Here is how to get your HP 2500CM color inkjet printer to work with OS X 10.2.
  1. Open Print Center and add the 2500CM printer using the HP Business Inkjet 2600PS profile (which is included with OS X 10.2)

  2. In any application, select Page Setup, and use these settings:
    • Format For: HP 2500 CM Pro
    • Paper Size: select your paper size (up to 13x19)

  3. Then, in any application, select Print and use these settings:
    • Duplex: duplexing option should be OFF
    • Paper Feed: Auto Select
    • Color Options: CMYK Inks = SWOP Emulation
    • Image Quality: Image Quality = Best
    • Printer Features: Media Type = select your media type
    Settings not mentioned can be set any way you choose. Other settings may also work, so please experiment!
PLEASE NOTE: It is very important to set the Page Setup settings correctly! Otherwise, your prints will look low-res and washed-out (even if all the settings in the Print dialog box are set correctly).
    •    
  • Currently 0.00 / 5
  • 1
  • 2
  • 3
  • 4
  • 5
  (0 votes cast)
 
[2,889 views]  

Set up an HP 2500CM inkjet printer with OS X 10.2 | 2 comments | Create New Account
Click here to return to the 'Set up an HP 2500CM inkjet printer with OS X 10.2' hint
The following comments are owned by whoever posted them. This site is not responsible for what they say.
13 x 19 ??
Authored by: wngdn on Sep 10, '02 10:09:35AM

Our HP 2500 uses paper up to 36 inches wide. Are you saying we can no longer use more than 19 inches of that? (Or worse: 13.)

Wangden



[ Reply to This | # ]
13 x 19 ??
Authored by: drolph on Sep 10, '02 11:46:17AM

The instructions above are for the 2500CM printer, which uses paper up to 13" x 19". You can probably get your printer to work by using a profile for a larger printer. Try one of the design jet profiles. Good luck!



[ Reply to This | # ]